Specification-based buying guide

    Lems ZenSpeed+

    Foot-shaped road trainer with more cushioning and a rocker than ZenSpeed Lite. Lems lists 31/26 mm stack, a 5 mm drop and 9.4 oz for a men's US 10 shoe; compare its weight only with the same measurement size. ZENCELL blends EVA with 10% PEBA.

    Available when checked

    Source checked 2026-10-25 · Not hands-on tested

    The shoe at a glance

    Under the foot

    Weight
    9.4 oz
    Heel stack
    31 mm
    Forefoot stack
    26 mm
    Listed drop
    5 mm

    Lems · Manufacturer or reviewer nominal specifications; measurement size is noted in the model description when available and may differ from other sources

    Stack-height schematic · not a product image

    ZenSpeed: previous models and series history

    Use these records to research changes, not to assume each measurement uses the same test size or source.

    Compare generations

    See what changed, then open either model for the full guide.

    ZenSpeed+ vs. ZenSpeed Lite

    Weight
    9.4 oz vs. 8.8 oz
    Heel stack
    31 mm vs. 24 mm
    Forefoot stack
    26 mm vs. 22 mm
    Listed drop
    5 mm vs. 2 mm

    Source or measurement basis differs or is unverified. Values are shown side by side without calculating differences.

    Series evolution

    Outlined bars show historical, unverified values. Recorded prices may include clearance and are not a price trend. The table below lists the exact values and evidence status.

    ModelWeightHeel / forefootDropRecorded priceEvidence
    ZenSpeed Lite8.8 oz24 mm / 22 mm2 mm165 USDSource checked
    ZenSpeed+9.4 oz31 mm / 26 mm5 mm175 USDSource checked

    Specifications at a glance

    Historical values are labeled, not newly verified. Prices are snapshots—not MSRP or live offers. Higher stack, lower weight and carbon construction do not establish a better shoe.

    Published and historical shoe specifications
    SpecificationLems ZenSpeed+Source checked
    Intended categorydaily training
    Weight9.4 oz
    Heel stack31 mm
    Forefoot stack26 mm
    Heel-to-toe drop5 mm
    Recorded price175 USD
    Stability categoryneutral
    Cushioning categorymedium
    Carbon reinforcementNo
    Performance foam categoryNot verified
    AvailabilityAvailable when checked

    Where ZenSpeed+ fits in your rotation

    Consider it for the regular easy runs that make up most of your week. Try it at your usual easy pace; an appealing specification sheet cannot establish whether the upper, heel hold and ride suit you.

    What the recorded measurements tell you

    Source-checked record: 9.4 oz per shoe, 31 mm heel stack, 26 mm forefoot stack and 5 mm drop. Weight is a comparison input, not a speed prediction. Stack describes height, not softness; drop describes heel-to-forefoot geometry, not injury protection. Manufacturer or reviewer nominal specifications; measurement size is noted in the model description when available and may differ from other sources.

    Construction and trade-offs to check

    The record classifies the platform as neutral with medium cushioning. No carbon reinforcement is recorded. Foam classification is not verified. Confirm toe-box room, heel hold and cornering confidence yourself; these are not established by the listed geometry.

    Price, availability and when to wait

    Available when checked. The recorded price is 175 USD. Recorded USD price; may be colorway-specific or clearance. Not MSRP, a live quote or a stock guarantee. Compare the same size, width and colorway, including return terms. A discounted older model may be worth considering if its fit and condition meet your needs.

    Before buying or upgrading

    Use the series links to check the previous ZenSpeed model, but only draw numerical conclusions when both entries have comparable, dated source measurements. Keep a comfortable existing shoe unless the new version addresses a specific need. For a new model, verify sizing, width options, outsole and return policy rather than inferring them from weight or price.

    Compare this shoe

    Other models to research

    Questions before buying

    What is the Lems ZenSpeed+ intended for?

    The catalog places it in daily training. Consider it for the regular easy runs that make up most of your week. Try it at your usual easy pace; an appealing specification sheet cannot establish whether the upper, heel hold and ride suit you.

    What is the weight and drop of the ZenSpeed+?

    Recorded weight: 9.4 oz; drop: 5 mm. Manufacturer or reviewer nominal specifications; measurement size is noted in the model description when available and may differ from other sources. Missing measurements are not estimated.

    Is the ZenSpeed+ available now?

    Available when checked. This is not a live inventory check. Confirm current stock for your size and colorway directly with the seller.

    How long will the ZenSpeed+ last, and will it fit me?

    We do not have independent wear-testing or fit measurements for this model. A fixed mileage lifespan or comfort rating would be misleading. Inspect your shoes for wear and changes in feel; use a try-on and the seller’s return policy to assess fit.

    How was this page researched?

    The linked source is Lems. Recorded verification date: 2026-10-25. Specification-based buying guidance, not a hands-on review. Running Warehouse is our preferred specification source when it lists a model; otherwise we link the manufacturer or a named specialist source. Measurement sizes and methods can differ. Categories and buying considerations are editorial interpretations, not measured performance. We do not invent comfort scores, durability mileage, fit tests or race-time gains.

    Sources, checks and editorial standards

    Specification-based buying guidance, not a hands-on review. Running Warehouse is our preferred specification source when it lists a model; otherwise we link the manufacturer or a named specialist source. Measurement sizes and methods can differ. Categories and buying considerations are editorial interpretations, not measured performance. We do not invent comfort scores, durability mileage, fit tests or race-time gains.

    Lems ZenSpeed+

    Source-checked specifications

    Recorded source check: 2026-10-25 (UTC date).

    Manufacturer or reviewer nominal specifications; measurement size is noted in the model description when available and may differ from other sources.

    • Source checked on the stated date, not continuously refreshed.
    • Fit, durability and running economy have not been independently tested by RunAnalytics.
    Check Lems

    Published by RunAnalytics. Sources are checked on the dates shown, not continuously. Spot an error? Send the model, disputed field and a source link. We retain older records for comparison, but do not label them as newly verified.

    Find the right role in your rotation